summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-12Initial commitGustaf Rydholm
2021-07-18Add 14th bit to XK_SWITCH_MOD bitmaskPetar Kapriš
The bits of uint signal in an XKeyEvent which concern the key group (keyboard layout) are bits 13 and 14, as documented here: https://www.x.org/releases/X11R7.7/doc/libX11/XKB/xkblib.html#Groups_and_Shift_Levels In the older version, only bit 13 was marked as part of XK_SWITCH_MOD, this causes issues for users who have more than two keymaps. the 14th bit is not in ignoremod, key sequences are not caught by match(), if they switch to a third or fourth keyboard.
2021-05-06Mild const-correctness improvements.Markus F.X.J. Oberhumer
Only touch a few things, the main focus is to improve code readability.
2021-03-19fix: correctly encode mouse buttons >= 8 in X10 and SGR modeHiltjo Posthuma
These are typically mapped in X11 to the side-buttons (backward/forwards) on the mouse. A comparison of the button numbers in SGR mode (first field): st old: 0 1 2 64 65 66 67 68 69 70 st new (it is the same as xterm now): 0 1 2 64 65 66 67 128 129 130 A script to test and reproduce it, first argument is "h" (on) or "l" (off): #!/bin/sh printf '\x1b[?1000%s\x1b[?1006%s' "$1" "$1" for n in 1 2 3 4 5 6 7 8 9 10; do printf 'button %d\n' "$n" xdotool click "$n" printf '\n\n' done
2020-10-18remove unused variable from previous patchHiltjo Posthuma
2020-10-18ST: Add WM_ICON_NAME property supportJohn Collis
Also added _NET_WM_ICON_NAME.
2020-06-19bump version to 0.8.4Hiltjo Posthuma
2020-06-17config.mk: use PKG_CONFIG in commented OpenBSD sectionHiltjo Posthuma
2020-06-17LICENSE: bump yearsHiltjo Posthuma
2020-06-17remove sixel stub codeHiltjo Posthuma
Remove stub code that was used for an experiment of adding sixel code to st from the commit f7398434.
2020-06-17fix unicode glitch in DCS strings, patch by Tim AllenHiltjo Posthuma
Reported on the mailinglist: " I discovered recently that if an application running inside st tries to send a DCS string, subsequent Unicode characters get messed up. For example, consider the following test-case: printf '\303\277\033P\033\\\303\277' ...where: - \303\277 is the UTF-8 encoding of U+00FF LATIN SMALL LETTER Y WITH DIAERESIS (ÿ). - \033P is ESC P, the token that begins a DCS string. - \033\\ is ESC \, a token that ends a DCS string. - \303\277 is the same ÿ character again. If I run the above command in a VTE-based terminal, or xterm, or QTerminal, or pterm (PuTTY), I get the output: ÿÿ ...which is to say, the empty DCS string is ignored. However, if I run that command inside st (as of commit 9ba7ecf), I get: ÿÿ ...where those last two characters are \303\277 interpreted as ISO8859-1 characters, instead of UTF-8. I spent some time tracing through the state machines in st.c, and so far as I can tell, this is how it works currently: - ESC P sets the "ESC_DCS" and "ESC_STR" flags, indicating that incoming bytes should be collected into the strescseq buffer, rather than being interpreted. - ESC \ sets the "ESC_STR_END" flag (when ESC is received), and then calls strhandle() (when \ is received) to interpret the collected bytes. - If the collected bytes begin with 'P' (i.e. if this was a DCS string) strhandle() sets the "ESC_DCS" flag again, confusing the state machine. If my understanding is correct, fixing the problem should be as easy as removing the line that sets ESC_DCS from strhandle(): diff --git a/st.c b/st.c index ef8abd5..b5b805a 100644 --- a/st.c +++ b/st.c @@ -1897,7 +1897,6 @@ strhandle(void) xsettitle(strescseq.args[0]); return; case 'P': /* DCS -- Device Control String */ - term.mode |= ESC_DCS; case '_': /* APC -- Application Program Command */ case '^': /* PM -- Privacy Message */ return; I've tried the above patch and it fixes my problem, but I don't know if it introduces any others. "
2020-06-01FAQ: fix single-buffer patchHiltjo Posthuma
rebase against master
2020-05-30config.def.h: add an option allowwindowops, by default off (secure)Hiltjo Posthuma
Similar to the xterm AllowWindowOps option, this is an option to allow or disallow certain (non-interactive) operations that can be insecure or exploited. NOTE: xsettitle() is not guarded by this because st does not support printing the window title. Else this could be exploitable (arbitrary code execution). Similar problems have been found in the past in other terminal emulators. The sequence for base64-encoded clipboard copy is now guarded because it allows a sequence written to the terminal to manipulate the clipboard of the running user non-interactively, for example: printf '\x1b]52;0;ZWNobyBoaQ0=\a'
2020-05-30FAQ: add some details about the w3m img hackHiltjo Posthuma
... and an example patch to switch from double-buffering to a single buffer.
2020-05-30tiny style fixHiltjo Posthuma
2020-05-30Partially add back in "support REP (repeat) escape sequence"Hiltjo Posthuma
Add the functionality back in for xterm compatibility, but do not expose the capability in st.info (yet). Some notes: It was reverted because it caused some issues with ncurses in some configurations, namely when using BSD padding (--enable-bsdpad, BSD_TPUTS) in ncurses it caused issues with repeating digits. A fix has been upstreamed in ncurses since snapshot 20200523. The fix is also backported to OpenBSD -current.
2020-05-24Call xsetcursor to set win.cursor in mainSteve Ward
In xsetcursor, remove "DEFAULT(cursor, 1)" because 0 is a valid value. Increase max allowed value of cursor from 6 to 7 (st extension).
2020-05-16Revert "support REP (repeat) escape sequence"Hiltjo Posthuma
This reverts commit e8392b282c2eaa28725241a9612804fb55113da4. There is currently a bug in older ncurses versions (like on OpenBSD) where a fix for a bug with REP is not backported yet. Most likely in tty/tty_update.c: Noticed while using lynx (which uses ncurses/curses). To reproduce using lynx: echo "Z0000000" | lynx -stdin or using the program: int main(void) { WINDOW *win; win = initscr(); printw("Z0000000"); refresh(); sleep(5); return 0; } This prints "ZZZZZZZ" (incorrectly).
2020-05-16support REP (repeat) escape sequenceAvi Halachmi (:avih)
The sequence \e[Nb prints the last printed char N (more) times if it's printable, and it's ignored after newline or other control chars. This is Ecma-048/ANSI-X3.6 sequence and not DEC VT. It's supported by xterm, and ncurses uses it when possible, e.g. when TERM is xterm* (and with this commit also st*). xterm supports only codepoints<=255, possibly due to internal limits. We support any value/codepoint which was placed in a cell. To test: - tput rep 65 4 -> prints 'AAAA' - printf "\342\225\246\033[4b" -> prints U+2566 1+4 times.
2020-05-16Add rin terminfo capabilityRoberto E. Vargas
Tianlin Qu discovered that st is missing rin (scroll back #1 lines).
2020-05-16Make shift+wheel behaves as shift+Prev/Nextk0ga
St uses a very good hack where mouse wheel genereates ^Y and ^E, that are the same keys that less and vi uses for backward and fordward scrolling. Scroll, as many terminal emulators, use shift+Prev/Next for scrolling, but it is also using ^E and ^Y for scroling, characters that are reserved in the POSIX shell in emacs mode for end of line and yanking, making scroll unsable in st. This patch adds a new hack, making shift+wheel returning the same sequences than shift+Prev/Next, meaning that scroll or any other similar program will not be able to differentiate between them.
2020-05-12Fix selection: selscrollJakub Leszczak
2020-05-12Fix selection: ignore ATTR_WRAP when rectangular selection in getselJakub Leszczak
2020-05-12Fix selection: selclear in tputcJakub Leszczak
2020-05-09code-style: add fallthrough commentHiltjo Posthuma
Patch by Steve Ward, thanks.
2020-05-09optimize column width calculation and utf-8 encode for ASCIIHiltjo Posthuma
In particular on OpenBSD and on glibc wcwidth() is quite expensive. On musl there is little difference.
2020-05-09fix for incorrect (partial) written sequences when libc wcwidth() == -1Hiltjo Posthuma
Fix an issue with incorrect (partial) written sequences when libc wcwidth() == -1. The sequence is updated to on wcwidth(u) == -1: c = "\357\277\275" but len isn't. A way to reproduce in practise: * st -o dump.txt * In the terminal: printf '\xcd\xb8' - This is codepoint 888, on OpenBSD it reports wcwidth() == -1. - Quit the terminal. - Look in dump.txt (partial written sequence of "UTF_INVALID"). This was introduced in: " commit 11625c7166b7e4dad414606227acec2de1c36464 Author: czarkoff@gmail.com <czarkoff@gmail.com> Date: Tue Oct 28 12:55:28 2014 +0100 Replace character with U+FFFD if wcwidth() is -1 Helpful when new Unicode codepoints are not recognized by libc." Change: Remove setting the sequence. If this happens to break something, another solution could be setting len = 3 for the sequence.
2020-05-09tiny code-style and typo-fix in commentHiltjo Posthuma
2020-05-09auto-sync: draw on idle to avoid flicker/tearingAvi Halachmi (:avih)
st could easily tear/flicker with animation or other unattended output. This commit eliminates most of the tear/flicker. Before this commit, the display timing had two "modes": - Interactively, st was waiting fixed `1000/xfps` ms after forwarding the kb/mouse event to the application and before drawing. - Unattended, and specifically with animations, the draw frequency was throttled to `actionfps`. Animation at a higher rate would throttle and likely tear, and at lower rates it was tearing big frames (specifically, when one `read` didn't get a full "frame"). The interactive behavior was decent, but it was impossible to get good unattended-draw behavior even with carefully chosen configuration. This commit changes the behavior such that it draws on idle instead of using fixed latency/frequency. This means that it tries to draw only when it's very likely that the application has completed its output (or after some duration without idle), so it mostly succeeds to avoid tear, flicker, and partial drawing. The config values minlatency/maxlatency replace xfps/actionfps and define the range which the algorithm is allowed to wait from the initial draw-trigger until the actual draw. The range enables the flexibility to choose when to draw - when least likely to flicker. It also unifies the interactive and unattended behavior and config values, which makes the code simpler as well - without sacrificing latency during interactive use, because typically interactively idle arrives very quickly, so the wait is typically minlatency. While it only slighly improves interactive behavior, for animations and other unattended-drawing it improves greatly, as it effectively adapts to any [animation] output rate without tearing, throttling, redundant drawing, or unnecessary delays (sounds impossible, but it works).
2020-04-30replace exit(3) by _exit(2) in signal handler sigchld()Jan Klemkow
exit(3) is not async-signal-safe but, _exit(2) is. This change prevents st to crash and dump core.
2020-04-27bump version to 0.8.3Hiltjo Posthuma
2020-04-19Update XIM cursor position only if changedIvan Tham
Updating XIM cursor position is expensive, so only update it when cursor position changed.
2020-04-11just remove the EOF messageHiltjo Posthuma
2020-04-11Add st-mono terminfo entryRoberto E. Vargas Caballero
This entry is intended for monocolor display and it is very helpful for color haters.
2020-04-11config.def.h: add a comment for the scroll variableHiltjo Posthuma
2020-04-11Fix small typosHiltjo Posthuma
2020-04-11Launch scroll program with the default shellQuentin Rameau
2020-04-11Update FAQ with the last modificationsRoberto E. Vargas Caballero
2020-04-11Add terminfo entries for backspace modeRoberto E. Vargas Caballero
St used to use backspace as BS until the commit 230d0c8, but due to general lack of knowledge of lusers, we moved to the most common configuration in linux to avoid answering the same question 3 times per month. With the most common configuration we have a backspace that returns a DEL, and we have a Delete key that doesn't return a DEL character neither a BS. When dealing with devices connected using a serial line (or even with Plan9) it is more common Backspace as BS and Delete as DEL. For this reason, st is not always the best tool when you talk with a serial device. This patch adds new terminfo entries for Backspace as BS and Delete as DEL. A patch for confg.h is also added, to make easier switch between both configurations.
2020-04-11Fix style issueRoberto E. Vargas Caballero
2020-04-11ttyread: test for EOF while reading ttyRoberto E. Vargas Caballero
When a read operation returns 0 then it means that we arrived to the end of the file, and new reads will return 0 unless you do some other operation such as lseek(). This case happens with USB-232 adapters when they are unplugged.
2020-04-11Add support for scroll(1)Roberto E. Vargas Caballero
Scroll is a program that stores all the lines of its child and be used in st as a way of implementing scrollback. This solution is much better than implementing the scrollback in st itself because having a different program allows to use it in any other program without doing modifications to those programs.
2020-04-10make argv0 not static, fixes a warning with tccHiltjo Posthuma
Reported by Aajonus, thanks!
2020-04-02mouseshortcuts: fix custom modifier on releaseAvi Halachmi (:avih)
This line didn't work at mshortcuts at config.h: /* mask button function arg release */ { ShiftMask, Button2, selpaste, {.i = 0}, 1 }, and now it does work. The issue was that XButtonEvent.state is "the logical state ... just prior to the event", which means that on release the state has the Button2Mask bit set because button2 was down just before it was released. The issue didn't manifest with the default shift + middle-click on release (to override mouse mode) because its specified modifier is XK_ANY_MOD, at which case match(...) ignores any specific bits and simply returns true. The issue also doesn't manifest on press, because prior to the event Button<N> was not down and its mask bit is not set. Fix by filtering out the mask of the button which we're currently matching. We could have said "well, that's how button events behave, you should use ShiftMask|Button2Mask for release", but this both not obvious to figure out, and specifically here always filtering does not prevent configuring any useful modifiers combination. So it's a win-win.
2020-02-19Remove explicit XNFocusWindowIvan Tham
XCreateIC ICValues default XNFocusWindow to XNClientWindow if not specified, it can be omitted since it is the same. From the documentation https://www.x.org/releases/current/doc/libX11/libX11/libX11.html > Focus Window > > The XNFocusWindow argument specifies the focus window. The primary > purpose of the XNFocusWindow is to identify the window that will receive > the key event when input is composed. > > When this XIC value is left unspecified, the input method will use the > client window as the default focus window.
2020-02-02x: fix XIM handlingQuentin Rameau
Do not try to set specific IM method, let the user specify it with XMODIFIERS. If the requested method is not available or opening fails, fallback to the default input handler and register a handler on the new IM server availability signal. Do the same when the input server is closed and (re)started.
2020-02-02x: check we still have an XIC context before accessing itQuentin Rameau
2020-02-02x: do not instantiate a new nested list on each cursor moveQuentin Rameau
2020-02-02x: move IME variables into XWindow ime embedded structQuentin Rameau
2020-01-18Increase XmbLookupString bufferIvan Tham
Current buffer is too short to input medium to long sentences from IME. Input with longer text will show the wrong input, taking 64 instead of 32 bytes should be enough for most of the cases. Broken cases before, Chinese (taken from song 也可以) 可不可以轻轻的松开自己 Japanese (taken from bootleggers rom quote) あなたは家のように感じる