| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Ignore processing and printing C1 control characters in UTF-8 mode.
These are in the range: 0x80 - 0x9f.
By default in st the mode is set to UTF-8.
This matches more the behaviour of xterm with the options -u8 or +u8 also.
Also see the xterm resource "allowC1Printable".
Let me know if this breaks something, in most cases I don't think so.
As usual a very good reference is:
https://invisible-island.net/xterm/ctlseqs/ctlseqs.html
|
|
"VT100 defines an escape sequence [1] called Device Status Report (DSR). When
the DSR sequence received is `csi 5n`, an "OK" response `csi 0n` is returned.
This patch adds that "OK" response.
I encountered this missing sequence when I noticed that fzf [2] would clobber
my prompt whenever completing a find.
To test that ST doesn't currently respond to `csi 5n`, use fzf's shell
extension in ST's repo to complete the path for a file.
my-fancy-prompt $ vim **<tab>
<select a file>
st.c
Select a file with <enter>, and notice that fzf clobbers some or all of your
prompt.
After applying this patch, do the same test as above and notice that fzf has no
longer clobbered your prompt by placing the file name in the correct position
in your command.
my-fancy-prompt $ vim **<tab>
<select a file>
my-fancy prompt $ vim st.c
Thank you for considering my first patch submission.
[1] https://www.xfree86.org/current/ctlseqs.html#VT100%20Mode
[2] https://github.com/junegunn/fzf
"
Patch slightly adapted with input from the mailinglist,
|
|
Adapted from (garbled) patch by wim <wim@thinkerwim.org>
Additional notes: it should reset all the colors using xloadcols().
To reproduce: set a different (theme) color using some escape code, then reset
it:
printf '\x1b]104\x07'
|
|
To reproduce the issue:
"
If you already have the multi-key enabled on your system, then add this line
to your ~/.XCompose file:
[...]
<question> <T> <E> <S> <T> <question> :
"1234567890123456789012345678901234567890123456789012345678901234567890"
"
Reported by and an initial patch by Andy Gozas <andy@gozas.me>, thanks!
Adapted the patch, for now st (like dmenu) handles a fixed amount of composed
characters, or otherwise ignores it. This is done for simplicity sake.
|
|
|
|
It is fixed in libXft 2.3.6:
https://gitlab.freedesktop.org/xorg/lib/libxft/-/blob/libXft-2.3.5/NEWS
|
|
|
|
|
|
|
|
the array is not accessed outside of base64dec() so it makes sense to
limit it's scope to the related function. the static-storage duration of
the array is kept intact.
this also removes unnecessary explicit zeroing from the start and end of
the array. anything that wasn't explicitly zero-ed will now be
implicitly zero-ed instead.
the validity of the new array can be easily confirmed via running this
trivial loop:
for (int i = 0; i < 255; ++i)
assert(base64_digits[i] == base64_digits_old[i]);
lastly, as pointed out by Roberto, the array needs to have 256 elements
in order to able access it as any unsigned char as an index; the
previous array had 255.
however, this array will only be accessed at indexes which are
isprint() || '=' (see `base64dec_getc()`), so reducing the size of the
array to the highest printable ascii char (127 AFAIK) + 1 might also be
a valid strategy.
|
|
all the ctype.h functions' argument must be representable as an unsigned
char or as EOF, otherwise the behavior is undefined.
|
|
|
|
Build on auto-sync and only mark window dirty on palette changes and let
the event handler do the actual draw.
|
|
|
|
|
|
This patch replaces the previous one I sent.
The following changes are made in this patch:
- Fix tracking of pressed buttons. Previously, pressing two buttons and
then releasing one would make st think no buttons are pressed, which
in particular broke MODE_MOUSEMOTION.
- Always send the lowest-numbered pressed button on motion events; when
no button is pressed for a motion event in MODE_MOUSEMANY, then send
a release. This matches the behaviour of xterm. (Previously, st sent
the most recently pressed button in the motion report.)
- Remove UB (?) access to potentially inactive struct member
e->xbutton.button of XEvent union.
- Fix (unlikely) possibility of overflow for large button numbers.
The one discrepancy I found between st and xterm is that xterm sometimes
encodes buttons with large numbers (>5) strangely. E.g., xterm reports
presses of buttons 8 and 9 as releases, whereas st properly (?) encodes
them as presses.
|
|
|
|
|
|
Overtyping the first half of a wide character with the
second half of a wide character results in display garbage.
This is because the trailing dummy is not cleaned up.
i.e. ATTR_WIDE, ATTR_WDUMMY, ATTR_WDUMMY
Here is a short script for demonstrating the behavior:
#!/bin/sh
alias printf=/usr/bin/printf
printf こんにちは！; sleep 2
printf '\x1b[5D'; sleep 2
printf へ; sleep 2
printf ' '; sleep 2
echo
|
|
According to the spec the argument is optional for 104, so p can be
NULL as can be tested with printf '\x1b]104\x07'. This is a regression
of 8e31030.
|
|
Otherwise the message "erresc: unknown str" is printed.
|
|
|
|
from the XmbTextListToTextProperty(3) man page:
"If insufficient memory is available for the new value string, the functions
return XNoMemory. If the current locale is not supported, the functions return
XLocaleNotSupported. In both of these error cases, the functions do not set
text_prop_return."
Reported by Steffen Nurpmeso <steffen@sdaoden.eu>, thanks!
|
|
In the current implementation, the slave PTY (assigned to the variable
`s') is always closed after duplicating it to file descriptors of
standard streams (0, 1, and 2). However, when the allocated slave PTY
`s' is already one of 0, 1, or 2, this causes unexpected closing of a
standard stream. The same problem occurs when the file descriptor of
the master PTY (the variable `m') is one of 0, 1, or 2.
In this patch, the original master PTY (m) is closed before it would
be overwritten by duplicated slave PTYs. The original slave PTY (s)
is closed only when it is not one of the stanrad streams.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
bottom graph display
|
|
|
|
|
